Smell gas? Call 1-866-763-5427
Close

Choose Your Province/State of Service

In order to serve you better, please select your Enbridge Gas location services.

Close

Choose Your Province/State of Service

We noticed you are visiting from Utah, would you like to visit our Utah site?

Continue to Utah's site

Or please select your province/state of your choice so we can display the correct content for your location?

Close

Choose Your Province/State of Service

In order to serve you better, please select your Enbridge Gas location services.

Ontarion Quebec Idaho Ohio Utah Wyoming state

is currently
selected

Go to this state's site Stay on this state's site
Close

Choose Your Province/State of Service

We noticed you are visiting from Utah, would you like to visit our Utah site?

Ontarion Quebec Idaho Ohio Utah Wyoming state

is currently
selected

Continue to Utah's site

Industrial Custom Engineering Program

Incentives and expert advice to lower your energy costs

Whether you run a large manufacturing plant or institutional building, there are always new ways to find efficiencies and reduce operating costs. We can help identify opportunities, quantify potential savings and provide incentives to offset the incremental cost of implementation. What you save on energy will go straight to your bottom line.

What’s in it for you?

  • A grey checkmark enclosed in a circle.

    Complimentary one-on-one expertise.

  • A grey checkmark enclosed in a circle.

    Help to identify and prioritize energy-efficiency projects.

  • A grey checkmark enclosed in a circle.

    Help to translate opportunities into measurable savings.

  • A grey checkmark enclosed in a circle.

    Incentives that cover up to 50 percent of incremental project costs.

Types of retrofit projects

Reduce losses

  • Insulate hot surfaces.
  • Reduce process exhaust.
  • Reduce blowdown.

Recover heat

  • Add condensing economizers on boilers.
  • Use air compressor waste heat.

Upgrade

  • Upgrade to high-efficiency equipment.

How we helped Magna drive down energy costs

To reduce heating costs in their facility, Motor Specialty Manufacturing Ltd., a division of Magna, implemented heat recovery and installed equipment controls.

  • 486,000 m3 natural gas saved/year.
  • $121,500 saved on natural gas/year.
  • $106,705 in incentives received.

“Enbridge Gas provided the information needed to quantify the potential savings for us, and gave us confidence to move forward with the projects. We are now saving six digits annually on energy costs, significantly reducing our carbon emissions and improving the comfort on our plant floor.”

Barry Staddon
Assistant General Manager, Motor Specialty Manufacturing Ltd., a division of Magna

How the program works

Contact an Energy Solutions Advisor for help identifying energy-efficiency opportunities in your facility.

They’ll work with you and/or your service provider to calculate or verify estimated savings and incentives.

Implement the energy-efficiency project.

Get an incentive that covers up to 50 percent of incremental project costs, up to $250,000 per project.

What are the incentives?

Custom engineering incentives
Incentive
Manufacturing
  • $0.30/m3 for the first 50,000 m3.
  • $0.10/m3 for the remaining up to $250,000 per project.
Agricultural/Greenhouse
  • $0.10/gross annual m3 saved.

Up to 50% of the incremental project cost, to a maximum of $250,000. Based on estimated natural gas savings achieved annually.

Is your project eligible?

  • A grey checkmark enclosed in a circle.

    You’re an Enbridge Gas customer.

  • A grey checkmark enclosed in a circle.

    Your facility uses natural gas for key equipment and processes.

  • A grey checkmark enclosed in a circle.

    Excludes accounts served under certain rates, based on service area.

Take control of your natural gas costs and emissions

The more energy you use, the higher your energy bills, emissions levels and operating costs. Fortunately energy is a cost that can be measured and controlled like any other input. Watch a pre-recorded workshop led by Damir Naden, Supervisor, Technical Services, Program Design & Technology, to learn more.

Connect with an Energy Solutions Advisor

We’ll help you find ongoing savings and get your project underway.



Industrial Custom Programs: Incentives apply to Enbridge Gas industrial customers for measures implemented and commissioned between Jan. 1 and Nov. 15 of the current calendar year. Projects must be pre-approved by Enbridge Gas. Volumetric savings are based either on Enbridge Gas approved engineering calculations or Enbridge Gas validated performance metrics. Enbridge Gas makes no warranty or guarantee regarding the estimated savings of any energy-efficiency measure. Replacements of existing energy-efficient equipment do not qualify. High-volume projects will be reviewed on a per-project basis. All applications are reviewed by Enbridge Gas and require verification of eligibility, proof of purchase and installation. Incentives cannot exceed 50 percent of incremental project costs and are only made available to customers where Enbridge Gas energy-efficiency offer(s) have impacted the customer’s decision to proceed with the improvement(s). HST is not applicable and will not be added to incentive payments. Programs are subject to change or cancellation without notice at any time.

Disclaimers:
Any references to energy savings is based on the assumption that the participant is reducing their natural gas consumption through participation in the Industrial Custom program.

Any references to Greenhouse Gas Emissions (GHG) reductions are based on the assumption that participation in the Industrial Custom program results in reduced natural gas consumption. Enbridge Gas does not make any claims regarding the specific amount of GHG reductions achieved.

Any references to energy savings and Greenhouse Gas Emissions (GHG) reductions is based on the case study participant reducing their natural gas consumption through participation in the Industrial Custom program. The natural gas savings are calculated using tools based on industry-accepted energy management practices. The GHG reductions are determined by using an emission factor of 0.001932 tones of CO2 equivalent per cubic meter of natural gas, as specified in the 2022 National Inventory Report. These projections are specific to this example and actual savings and GHG reductions may vary for each project.